Photo of four Rubber Footers shown installed on a Zu loudspeaker.

Photo of four Rubber Footers shown installed on a Zu loudspeaker. Alternate view.

Rubber Footers Uncoated (4x)

$32.00

Price is for a set of four (4x). If you need enough for a pair of loudspeakers order two packs.

Uncoated version of the Zu Rubber Hi-Fi Footers. A set of four uncoated rubber footers are recommended for loudspeakers and amps weighing up to 160 pounds.

NOTE: The uncoated rubber footers may stain or mark wood flooring, the hi-fi version are coated and also have a clear rubber bottom-side ring to prevent color marking the flooring. Both pro and hi-fi version are based on the same part.

These specifically engineered rubber-type footers will significantly reduce the transmission of vibration between the loudspeaker or subwoofer and the floor. In most cases this reduces noise and improves resolution. And they make neighbors, particularly those living below the loudspeaker, more agreeable to your existence. Engineering, material and molding by Tech Products, Ohio. Cleanup by Zu.

Rubber footers feature 3/8-16 female steal insert. This is the same size we use on all of our bottom inserts. This size also allows the pass-through of 5/16, 1/4 and M6 and smaller screws. See photos for dimensional detail.

Price is for a set of four (4x). If you need enough for a pair of loudspeakers order two packs.

Uncoated version of the Zu Rubber Hi-Fi Footers. A set of four uncoated rubber footers are recommended for loudspeakers and amps weighing up to 160 pounds.

NOTE: The uncoated rubber footers may stain or mark wood flooring, the hi-fi version are coated and also have a clear rubber bottom-side ring to prevent color marking the flooring. Both pro and hi-fi version are based on the same part.

These specifically engineered rubber-type footers will significantly reduce the transmission of vibration between the loudspeaker or subwoofer and the floor. In most cases this reduces noise and improves resolution. And they make neighbors, particularly those living below the loudspeaker, more agreeable to your existence. Engineering, material and molding by Tech Products, Ohio. Cleanup by Zu.

Rubber footers feature 3/8-16 female steal insert. This is the same size we use on all of our bottom inserts. This size also allows the pass-through of 5/16, 1/4 and M6 and smaller screws. See photos for dimensional detail.

Here’s what these vibration damping feet do:

Reduce vibration between equipment and flooring.
Protect your wood or tile floor from impressions and digs without having to slide coins or glides under the original equipment ball-end footers. When installed, the gap-height necessary for some Zu speakers (the space between the bottom of the speaker and floor) is no longer altered by adjusting the footer, instead use magazines (Rolling Stone fits perfect) or the like between the floor and loudspeaker bottom to create the desired gap. [Details on gap here]
Where spikes cut through the carpet and couple the mass of the speaker and the floor, these footers decouple. Decoupling lowers the loudspeaker cabinets fundamental resonance significantly.
Your neighbors will also be less annoyed as these feet will significantly reduce the number of calls you get from those living under and around you.
Simple to install, the rubber feet have a threaded insert that fits the original ball-end footer screws. Simply remove the nut from the ball-end screws, turn the screw so there is about a 1/2” [12mm] visible, thread the rubber foot onto the screw and cinch it up by hand. The only tool you need is a wrench to loosen the 9/16” [14mm] ball-end screw nut.

Engineering, material and molding by Tech Products, Ohio. Finish work by Zu Audio.

Rubber Footers Uncoated (4x)

Dims are in inches.

Reviews