Soul Superfly Jupiter Upgrade Kit
Upgrade your Soul Mk.I Superfly loudspeakers with this easy DIY Jupiter Copper Foil & Wax Capacitor Kit—only basic solder and screwdriver skills required.
Soul-1 Superfly Jupiter Copper Foil & Wax Capacitor Upgrade Kit has correct length leadouts that are prepped and terminated so you don’t have to mess with stripping Teflon or installing terminals. You will need to solder on the tweeter driver, but that is the extent of the soldering.
This kit replaced the the tweeter’s high-pass network. More information on the differences and what you can expect from this kit are discussed further down.
Video (link below) shows the upgrade being performed on the DW-6. It is similar to the Soul-1, the difference is there’s no foam piece to remove on the Soul-1, and the tweeter driver require soldering. No, you don’t want to add any foam to the Soul Mk.I, the DW-6 is very different funtionally—DO NOT CHANGE THE INTERNAL FOAM ARMAMENT.
How-to instructional video: https://www.youtube.com/watch?v=Qyom511U00Y
Soul-1 Superfly Jupiter Copper Foil & Wax Capacitor Kit Includes
Built with leadouts that are ready to connected to Soul Mk.I Superfly speakers—leads are prepped and ready to install, soldering is required on the tweeter
Matched pair (0.2% or better) Jupiter Copper Foil & Wax capacitors, from the same batch (no cross batch matching)
Cap bodies measure 2.1" [53mm] long, 1.1" [28mm] diameter
Capacitors are made in USA for Zu Audio
New set of PTFE insulated silver-copper tweeter ground leads, ready for soldering
Syringe of Loctite™ SI-5900 adhesive, that you use to secure the Jupiter capacitor to the back-center of the tweeter driver
Price is for a matched pair (2x).
Upgrade your Soul Mk.I Superfly loudspeakers with this easy DIY Jupiter Copper Foil & Wax Capacitor Kit—only basic solder and screwdriver skills required.
Soul-1 Superfly Jupiter Copper Foil & Wax Capacitor Upgrade Kit has correct length leadouts that are prepped and terminated so you don’t have to mess with stripping Teflon or installing terminals. You will need to solder on the tweeter driver, but that is the extent of the soldering.
This kit replaced the the tweeter’s high-pass network. More information on the differences and what you can expect from this kit are discussed further down.
Video (link below) shows the upgrade being performed on the DW-6. It is similar to the Soul-1, the difference is there’s no foam piece to remove on the Soul-1, and the tweeter driver require soldering. No, you don’t want to add any foam to the Soul Mk.I, the DW-6 is very different funtionally—DO NOT CHANGE THE INTERNAL FOAM ARMAMENT.
How-to instructional video: https://www.youtube.com/watch?v=Qyom511U00Y
Soul-1 Superfly Jupiter Copper Foil & Wax Capacitor Kit Includes
Built with leadouts that are ready to connected to Soul Mk.I Superfly speakers—leads are prepped and ready to install, soldering is required on the tweeter
Matched pair (0.2% or better) Jupiter Copper Foil & Wax capacitors, from the same batch (no cross batch matching)
Cap bodies measure 2.1" [53mm] long, 1.1" [28mm] diameter
Capacitors are made in USA for Zu Audio
New set of PTFE insulated silver-copper tweeter ground leads, ready for soldering
Syringe of Loctite™ SI-5900 adhesive, that you use to secure the Jupiter capacitor to the back-center of the tweeter driver
Price is for a matched pair (2x).
Upgrade your Soul Mk.I Superfly loudspeakers with this easy DIY Jupiter Copper Foil & Wax Capacitor Kit—only basic solder and screwdriver skills required.
Soul-1 Superfly Jupiter Copper Foil & Wax Capacitor Upgrade Kit has correct length leadouts that are prepped and terminated so you don’t have to mess with stripping Teflon or installing terminals. You will need to solder on the tweeter driver, but that is the extent of the soldering.
This kit replaced the the tweeter’s high-pass network. More information on the differences and what you can expect from this kit are discussed further down.
Video (link below) shows the upgrade being performed on the DW-6. It is similar to the Soul-1, the difference is there’s no foam piece to remove on the Soul-1, and the tweeter driver require soldering. No, you don’t want to add any foam to the Soul Mk.I, the DW-6 is very different funtionally—DO NOT CHANGE THE INTERNAL FOAM ARMAMENT.
How-to instructional video: https://www.youtube.com/watch?v=Qyom511U00Y
Soul-1 Superfly Jupiter Copper Foil & Wax Capacitor Kit Includes
Built with leadouts that are ready to connected to Soul Mk.I Superfly speakers—leads are prepped and ready to install, soldering is required on the tweeter
Matched pair (0.2% or better) Jupiter Copper Foil & Wax capacitors, from the same batch (no cross batch matching)
Cap bodies measure 2.1" [53mm] long, 1.1" [28mm] diameter
Capacitors are made in USA for Zu Audio
New set of PTFE insulated silver-copper tweeter ground leads, ready for soldering
Syringe of Loctite™ SI-5900 adhesive, that you use to secure the Jupiter capacitor to the back-center of the tweeter driver
Price is for a matched pair (2x).
Return Of Old Parts Credits
There is no return credit on the Soul Mk.I loudspeakers.
Warranty
5-year warranty on parts.
Guarantee
This kit is covered by your 60-day satisfaction guarantee. Install the kit, give it a month to burn-in and sound it’s best, after which if you decide the cost isn’t worth it, reinstall the original parts and send the kit back for full refund, we pay return shipping.
How Long Does This Take?
2 hours of labor, 12 hours of letting the adhesive cure. Most will take about an hour to disassemble the pair of speakers, then another hour of labor to install and reassemble. This is a pretty easy swap out and the video is shot without much in editing, giving you a good idea of time and difficulty.
What Tools Are Needed?
Clean tabletop and blanket or pad, so you can operate on your speakers as they lay speaker drivers up
#1 square drive screwdriver
Torx T20 drive screwdriver
Soldering Iron (2 - 4% silver bearing solder is recommended)
What Are The Sound Differences Between The Standard, ClarityCap MR, And Jupiter Copper Foil & Wax?
Compared to the base model’s basic polypropylene capacitor, the Jupiter Copper is much more relaxed and smooth sounding, all while raising resolution. The combination of reduced noise and improved transient response let you hear deeper into the sound field—improved stereophony, better timber of brass and percussion-heavy instruments, more revealing vocals, improved tone and color resolution of string-based instruments—a very nice bump in smoothness and holography, where the recreated sound space is more “reach out and touch you” and buttery, without sacrificing any detail in resolution.
What Capacitors Came In Omen Mk.I Speakers?
Basic polypropylene capacitors souch as Solan or ERSE Pulse-X.
