Plinth Kit Set
Stability Plinth
Price is for a pair (2x). While designed for the Omen Def, this kit works with DW-6, Union-6, Union-6 Supreme, Omen Def I & II, Omen I & II, Omen DW I & II, Soul Superfly I & II, and Soul Supreme.
Includes wide plinth assembly for improved fidelity and rocksteady stability.
Size: 15-1/2 x 15-1/2 x 1-1/4 inch [39.3 x 39.3 x 32 cm]
Material: MDF with epoxy skin.
Finish: Black, epoxy composite, spatter
Thread: 3/8–16
Packed: 2x plinth kits in a single shipping box
(Note, we still don’t have assembly instructions on this, it’s pretty easy, and we’re happy to take the time on the phone.)
Wide Plinth Kit Parts List
2x Bolt-on Wide Plinth
8x Bearing Footer Assemblies for hard surfaces, rugs and most carpet
[8x nickel plated footer with bare bottom measuring 1-1/4” diameter
[8x stainless steel adjustment shaft (3/8–16 x 1-1/2)]
[8x stainless steel jam nuts]
8x large rubber pucks for setting the gap between speaker and bolt-on wide plinth
8x 3/8–16 x 3” stainless flathead screws
Included Tools
1x 9/16” thin open ended wrench (Williams 1136A) for locking the footers via the bottom side jam nuts
1x 3/16” hex driver (Eklind 91112) for top-down leveling adjustment of footers
1x 7/32” hex key used to assembly the wide plinth to the loudspeakers
Stability Plinth
Price is for a pair (2x). While designed for the Omen Def, this kit works with DW-6, Union-6, Union-6 Supreme, Omen Def I & II, Omen I & II, Omen DW I & II, Soul Superfly I & II, and Soul Supreme.
Includes wide plinth assembly for improved fidelity and rocksteady stability.
Size: 15-1/2 x 15-1/2 x 1-1/4 inch [39.3 x 39.3 x 32 cm]
Material: MDF with epoxy skin.
Finish: Black, epoxy composite, spatter
Thread: 3/8–16
Packed: 2x plinth kits in a single shipping box
(Note, we still don’t have assembly instructions on this, it’s pretty easy, and we’re happy to take the time on the phone.)
Wide Plinth Kit Parts List
2x Bolt-on Wide Plinth
8x Bearing Footer Assemblies for hard surfaces, rugs and most carpet
[8x nickel plated footer with bare bottom measuring 1-1/4” diameter
[8x stainless steel adjustment shaft (3/8–16 x 1-1/2)]
[8x stainless steel jam nuts]
8x large rubber pucks for setting the gap between speaker and bolt-on wide plinth
8x 3/8–16 x 3” stainless flathead screws
Included Tools
1x 9/16” thin open ended wrench (Williams 1136A) for locking the footers via the bottom side jam nuts
1x 3/16” hex driver (Eklind 91112) for top-down leveling adjustment of footers
1x 7/32” hex key used to assembly the wide plinth to the loudspeakers
Stability Plinth
Price is for a pair (2x). While designed for the Omen Def, this kit works with DW-6, Union-6, Union-6 Supreme, Omen Def I & II, Omen I & II, Omen DW I & II, Soul Superfly I & II, and Soul Supreme.
Includes wide plinth assembly for improved fidelity and rocksteady stability.
Size: 15-1/2 x 15-1/2 x 1-1/4 inch [39.3 x 39.3 x 32 cm]
Material: MDF with epoxy skin.
Finish: Black, epoxy composite, spatter
Thread: 3/8–16
Packed: 2x plinth kits in a single shipping box
(Note, we still don’t have assembly instructions on this, it’s pretty easy, and we’re happy to take the time on the phone.)
Wide Plinth Kit Parts List
2x Bolt-on Wide Plinth
8x Bearing Footer Assemblies for hard surfaces, rugs and most carpet
[8x nickel plated footer with bare bottom measuring 1-1/4” diameter
[8x stainless steel adjustment shaft (3/8–16 x 1-1/2)]
[8x stainless steel jam nuts]
8x large rubber pucks for setting the gap between speaker and bolt-on wide plinth
8x 3/8–16 x 3” stainless flathead screws
Included Tools
1x 9/16” thin open ended wrench (Williams 1136A) for locking the footers via the bottom side jam nuts
1x 3/16” hex driver (Eklind 91112) for top-down leveling adjustment of footers
1x 7/32” hex key used to assembly the wide plinth to the loudspeakers
