9/16 Thin Wrench
This thin double-ended wrench is perfect for use on the jam nuts used on the bottom of Zu loudspeakers. Thin profile of .236” [6mm] so you can use with jam and binding nuts. Also not too long at 5.6” [142mm] length. Ends are both 9/16 inch and are offset (15 and 80 degrees) to permit easy positioning in awkward spaces and angles. Continuous arc design minimizes spreading and is much stronger than a V-style design. Corrosion resistance and slip resistant grip, 45 degree chamfer on ends facilitate easy placement on nut.
Williams PN: 1136A
Formerly made in USA, now imported.
This thin double-ended wrench is perfect for use on the jam nuts used on the bottom of Zu loudspeakers. Thin profile of .236” [6mm] so you can use with jam and binding nuts. Also not too long at 5.6” [142mm] length. Ends are both 9/16 inch and are offset (15 and 80 degrees) to permit easy positioning in awkward spaces and angles. Continuous arc design minimizes spreading and is much stronger than a V-style design. Corrosion resistance and slip resistant grip, 45 degree chamfer on ends facilitate easy placement on nut.
Williams PN: 1136A
Formerly made in USA, now imported.
This thin double-ended wrench is perfect for use on the jam nuts used on the bottom of Zu loudspeakers. Thin profile of .236” [6mm] so you can use with jam and binding nuts. Also not too long at 5.6” [142mm] length. Ends are both 9/16 inch and are offset (15 and 80 degrees) to permit easy positioning in awkward spaces and angles. Continuous arc design minimizes spreading and is much stronger than a V-style design. Corrosion resistance and slip resistant grip, 45 degree chamfer on ends facilitate easy placement on nut.
Williams PN: 1136A
Formerly made in USA, now imported.
